| |
|
| |
 |
 |
Fast Ethernet Supreme Media Converter
|
 |
|
| |
 |
 |
Link loss carry forward (LLCF) & link loss
return (LLR)
MDI
to MDIX auto negotiation (A/N)
Easy
system configuration by DIP
A/N
or manual 10/100M and HDX/FDX
selection
F/O
segment extension up to 2Km (MM)
and 120Km (SM)
Easy
Installation and maintenance
Status
monitoring by front LED display
STP/UTP
cabling support
Far-end-fault
detection |
|
|
|
| |
|
| |
 |
ITEM |
SPECIFICATION |
Standard |
IEEE 802.3u 100BaseTx to 100BaseFx |
| IEEE 802.3u 10BaseT, CSMA/CD |
Connector |
UTP/STP : RJ-45 |
| OPTIC : SC type (ST/LC/MT-RJ→ Optional) |
Transmission
Distance |
UTP/STP : 100meters (Cat. 5) |
| OPTIC : Multi mode : up to ~ 2km, Single mode
: up to ~ 120km |
Auto-negotiation |
MDI/MDIX (Media Dependant Interface
/Cross) |
| 10/100Mbps, Half/Full Duplex |
Transmission Speed |
10Mbps &100Mbps |
Duplex mode |
Full / Half-Duplex |
Display |
TLK, TSP, TDU, FLK, FDU, FSD, LFA,
PWR |
Input Power |
AC110/220V(50/60Hz),
DC 24V/-48V(Optional) |
Environmental Condition |
Operating Temperature : 0 ~ 70 , Operating Humidity
: 5% ~ 95% |
Dimension (mm) |
H x W x D (25 x 74 x 110) |
|
|
|
 |
 |
|
|
|
|
|
|
FMC |
|
|
|
|
Connector Type |
| Fostec Media Convert |
WBR (WDM Bidirectional
Receptacle) Mode |
SS : Single Mode
60Km
SE : Single Mode 80Km |
MM : Multi Mode
ST : Single Mode 20Km
SF : Single Mode 40Km |
S: with SNMP
X : Without SNMP |
1:SC
2 :ST
3 :LC |
|
|
|
|
|
|
|
|
19inch Collective Shelf with Supreme Media Converter
|
|
|
|
 |
|
19“ Rack mountable shelf type with 21 slots
Remote maintenance and operation by
SNMP / Telnet /WEB / Console
Redundant power supply
(Hot-Swappable
Operation)
Available with ST, SC, VF-45, MT-RJ or
LC F/O connectors
Cooling fan control by thermal automatic
sensing
Removable SMCU/CCU/PSU without power
shutdown
Stable, high-bandwidth, short/Long-Haul
transmission for fast ethernet
Media
conversion 10Mbps/100Mbps
Ethernet-signal
to 100Mbps FX(Fiber)
Easy installation and maintenance |
|
|
|
|
ITEM |
SPECIFICATION |
Transmission Speed |
10Mbps / 100Mbps, Auto-negotiation |
Duplex mode |
Full / Half-Duplex, Auto-negotiation |
Display |
SMCU module : PW, TD, LF, FL, FD,
SD, TL, TS |
| CCU module : LK, SP, PW, F/H |
| PSU module : PWR, FAIL |
Dimension(mm) |
H x W x D (88 x 482 x 350) |
|
|
|
| |
|
 |
|
|
|
|
|
|
|
FCSMC |
|
|
|
|
|
|
| Fostec Collective
Shelf Media Convert |
WM : WBR (WDM Bidirectional
Receptacle) Mode |
SS : Single Mode
60Km
SE : Single Mode 80Km |
MM : Multi Mode
ST : Single Mode 20Km
SF : Single Mode 40Km |
S: With SNMP
X : Without SNMP |
SC : SC Connection
Type
ST : ST Connection Type
LC : LC Connection Type |
Slot
[ 1 ~ 21M ] |
|
|
|
| |
|
|
|
|
Optical Cable Reduser (OCR)
|
|
|
|
 |
|
This equipment (Optical Cable Reducer) is a system
which enhances the effect
of optical line by transmitting and receiving with
1Core using WDM (Wavelength
Division Multiplexer) by installing optical equipment
for 1310mn with less than
155Mbps between COT and RT. |
|
|
|
PARAMETER |
SPECIFICATION |
| Wave Separation and Integration Function |
1310nm / 1550nm |
| Network Configuration |
P to P, P to MP, Ring, Star, etc. |
| Connection with Optical Equipment |
2Mbit/s ~ 155Mbit/s |
| Capacity (Stand Alone) |
2 lines |
Characteristics
of Optical Line |
OIU-C |
Transmitting Wavelength |
1310nm Typ, 1550nm Typ, MLM |
| Optical Output |
-8 ~ -15dBm |
| Receiving Wavelength |
1200 ~ 1400(1600)nm |
| Receiving Level |
-8 ~ -34dBm |
OIU-R |
Optical Wavelength |
1310/1550nm 15nm |
| Isolation |
16dB more than |
Operating Source |
110/220VAC or 48VDC (OIU-C),
batteryless (OIU-R) |
| Type of Optical Connector |
SC/PC |
| Operation Condition |
2 ℃~ +50 , 20 ~ 80% |
|
|
|
| |
|
|
|
|
Optical Wavelength Converter (OWC)
|
|
|
|
 |
| |
|
Conversion MM (Multi Mode) to SM (Single Mode)
Conversion 1310nm to 1550nm
Conversion 1310nm to 850nm
Conversion 850nm to 1550nm
Provide I/F function with all optical equipment by having
the above conversion function
1.5Mbps ~ 1.25Gbps support (10/100/1000M ethernet, SONET/SDH
OC-3, STM-1).
Distance extension up to ~120Km
Reduce optical fiber 2core to 1core |
|
|
| |
|
PARAMETER |
SPECIFICATION |
| Optic I/F |
MM : 850nm, 1310nm, SM : 1310nm, 1550nm |
| Power |
1slot : AC110/220V Adaptor (+5vDC),
2 slots : AC220V 60Hz (-48vDC : Optional) |
| Environment Conditions |
0 ℃~ 70℃ (Operating Temperature), -40℃ ~ 85℃ (Storage
Temperature) |
| Humidity : 5% ~ 95% |
| Dimension (H x W x D) |
1slot (23 x 72 x 165), 2 slots (45 x 200 x 250) |
| Distance |
850nm : 500m, 1310nm : 2Km, 20Km, 40Km, 1550nm
: Up to ~ 120Km |
|
|
|
|
|
|
